MSR206 Writer Tutorial


✨ Tracks Seller ✨
Advanced Vendor
Oct 28, 2016
Who ever want to work dumps with or without pin must first get an msr.
The msr is a magnetic reader and writer machine which will allow you to read the data from a credit/debit card or to write some data on a magnetic strip card.
A msr price is between $300 to $1000 but even a cheap msr will work just fine.
Once you buy the msr you must run the software program in your computer.
When you had installed the program you can start to test the machine.
First you can play with any card and see what is going on.

Before you start to write the valid dumps you will need to practice writing because the small mistakes will make the card to not work.
Personal i use a msr206,as you can see is not an expansive machine but i can tell you that it is good enough for write any kind of dump on a card.Msr has a read function and a write function.
You can start buy write some invalid dumps on card and then read them to verify if your dumps was written on the card.
The msr have 3 tracks which you have to fill correct so you will get a working card.
Lets us take an invalid dump and try to fill up the track

Dump sample
4539781954300875=13022010550000001001 pin9946 .Guys this is not a valid dump so don't try to became rich by using it!

Now let's go back to our msr.Here is the msr206.

After you got your msr software installed and you machine ready to work you will open a window like this.

Fill track 1 with

You can put any name but try to put the name from the fake id and card.For better understanding check the site.

Fill track 2 with

Then click write.Once the led of the msr is on you have to sweep the card ..The message "writing done" will came in message space. Then verify if your card was written.Click read on the msr window and then when the machine led is on sweep the card.You will see that the track1 and 2 will be filled with the dump data.I'll try to make a video if you will request it.
I recommend you to buy dumpz with original track1/track2,they are much more easy to work.I'll make a post to teach you how to generate track 1 from track 2 also.
Good luck and be safe!
Top Bottom